Bioenergy II: Effect of experimental conditions on the slow batch pyrolysis of mixtures of plastics, tyres and forestry biomass wastes

Filipe Paradela, Filomena Pinto, Isabel Cabrita, Ibrahim Gulyurtlu, Ana M. Ramos

Research output: Contribution to journalArticlepeer-review

2 Citations (Scopus)

Abstract

This work aimed to study the recovery of three types of waste by the process of pyrolysis: biomass, plastics and used tyres. The effects of experimental conditions in products yield and composition were studied. The increase of reaction time increased alkane content both in gas phase from 53% to 70% v/v and in liquid fraction from 48% to 60% w/w. The rise of reaction temperature led to a decrease of liquid yield (from 82% to 73% w/w), which was followed by the increase of solids and gases. The increase of reaction temperature also allowed the increase of the alkane content in gas phase from 39% to 70% v/v. The increase of initial pressure did not lead to appreciable variations in product yields or composition. The parameter that most affected products yield and composition was plastics content on the wastes initial mixture. The enhancement of this parameter increased liquids yield from 33% to 92% w/w, at the expenses of solids and gases contents and also decreased aromatics contents from 52% to 28% w/w.

Original languageEnglish
Article numberA86
JournalInternational Journal of Chemical Reactor Engineering
Volume7
DOIs
Publication statusPublished - 1 Dec 2009

Keywords

  • Biomass
  • Plastics
  • Pyrolysis
  • Tyres
  • Waste

Fingerprint Dive into the research topics of 'Bioenergy II: Effect of experimental conditions on the slow batch pyrolysis of mixtures of plastics, tyres and forestry biomass wastes'. Together they form a unique fingerprint.

Cite this