Construction of effective disposable biosensors for point of care testing of nitrite

Tiago Monteiro, Patrícia R. Rodrigues, Ana Luisa Gonçalves, José J G Moura, Elena Jubete, Larraitz Añorga, Barbora Piknova, Alan N. Schechter, Célia Marisa Costa Figueiredo Silveira, Maria Gabriela Machado de Almeida

Research output: Contribution to journalArticlepeer-review

17 Citations (Scopus)

Abstract

In this paper we aim to demonstrate, as a proof-of-concept, the feasibility of the mass production of effective point of care tests for nitrite quantification in environmental, food and clinical samples. Following our previous work on the development of third generation electrochemical biosensors based on the ammonia forming nitrite reductase (ccNiR), herein we reduced the size of the electrodes' system to a miniaturized format, solved the problem of oxygen interference and performed simple quantification assays in real samples. In particular, carbon paste screen printed electrodes (SPE) were coated with a ccNiR/carbon ink composite homogenized in organic solvents and cured at low temperatures. The biocompatibility of these chemical and thermal treatments was evaluated by cyclic voltammetry showing that the catalytic performance was higher with the combination acetone and a 40 °C curing temperature. The successful incorporation of the protein in the carbon ink/solvent composite, while remaining catalytically competent, attests for ccNiR's robustness and suitability for application in screen printed based biosensors. Because the direct electrochemical reduction of molecular oxygen occurs when electroanalytical measurements are performed at the negative potentials required to activate ccNiR (ca.-0.4 V vs Ag/AgCl), an oxygen scavenging system based on the coupling of glucose oxidase and catalase activities was successfully used. This enabled the quantification of nitrite in different samples (milk, water, plasma and urine) in a straightforward way and with small error (1-6%). The sensitivity of the biosensor towards nitrite reduction under optimized conditions was 0.55 A M-1 cm-2 with a linear response range 0.7-370 μM.

Original languageEnglish
Pages (from-to)246-251
Number of pages6
JournalTalanta
Volume142
DOIs
Publication statusPublished - 2015

Keywords

  • Biosensors
  • Carbon conductive ink
  • Cytochrome c nitrite reductase
  • Nitrite
  • Point of care testing
  • Screen printed electrodes

Fingerprint Dive into the research topics of 'Construction of effective disposable biosensors for point of care testing of nitrite'. Together they form a unique fingerprint.

Cite this