Nanostructure characterization of high k materials by spectroscopic ellipsometry

Research output: Contribution to journalArticlepeer-review

15 Citations (Scopus)

Abstract

In this work, the optical and structural properties of high k materials such as tantalum oxide and titanium oxide were studied by spectroscopic ellipsometry, where a Tauc-Lorentz dispersion model based in one (amorphous films) or two oscillators (microcrystalline films) was used. The samples were deposited at room temperature by radio frequency magnetron sputtering and then annealed at temperatures from 100 to 500 °C. Concerning the tantalum oxide films, the increase of the annealing temperature, up to 500 °C does not change the amorphous nature of the films, increasing, however, their density. The same does not happen with the titanium oxide films that are microcrystalline, even when deposited at room temperature. Data concerning the use of a four-layer model based on one and two Tauc-Lorentz dispersions is also discussed, emphasizing its use for the detection of an amorphous incubation layer, normally present on microcrystalline films grown by sputtering.
Original languageEnglish
Pages (from-to)339-343
Number of pages5
JournalApplied Surface Science
Volume253
Issue number1
DOIs
Publication statusPublished - 31 Oct 2006

Fingerprint Dive into the research topics of 'Nanostructure characterization of high k materials by spectroscopic ellipsometry'. Together they form a unique fingerprint.

Cite this