Smoothed particle hydrodynamics numerical model for modeling an oscillating water chamber

Eric Didier, Diogo R. C. B. Neves, Paulo R. F. Teixeira, João Paulo Dias, Maria Graça Neves

Research output: Contribution to journalArticlepeer-review

11 Citations (Scopus)

Abstract

This paper presents the application and the validation of the SPH numerical model SPHyCE, based on a standard Smoothed Particle Hydrodynamics formulation, for modeling an onshore oscillating water chamber, comparing results of amplification factor and phase lag with those obtained by a mesh-based RANS model. Firstly, an analysis of the results for different resolutions (i.e. particle dimension) showed the independence of results with refinement. Secondly, the amplification factor of mean free surface elevation inside the oscillating water chamber and the phase lag between time series of free surface elevation outside and inside the water chamber were analysed. A good agreement was achieved between the mesh free SPHyCE model and the mesh-based RANS model. SPHyCE model was finally applied to analyse the hydrodynamic fluid flow inside and outside the water chamber and to quantify the forces on the vertical wall and the amplification factor for different incident wave heights for a rough sea state with complex wave breaking, impact loads and overtopping, contributing to the future applications of SPH models for development and studies of OWC devices.

Original languageEnglish
Pages (from-to)397-410
Number of pages14
JournalOcean Engineering
Volume123
DOIs
Publication statusPublished - 1 Sep 2016

Keywords

  • Coastal engineering
  • Hydrodynamic forces
  • Oscillating water chamber
  • SPH
  • Wave–structure interaction

Fingerprint Dive into the research topics of 'Smoothed particle hydrodynamics numerical model for modeling an oscillating water chamber'. Together they form a unique fingerprint.

Cite this